Accesspoint shouldnot join WLC

Unanswered Question
Sep 13th, 2008
User Badges:

Hi

I have WLC which is having 70 accesspoint associated with it.The model num of accesspoint is 1242.But if any one from outside bring one same model of accesspoint and tried to connect it should not connect.Did any one knows how to configure the controller for this or any other option.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Scott Fella Sat, 09/13/2008 - 06:04
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

You can authorize ap via AAA server. Here is a link to look at. Hope this is what you are looking for:


http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml

Scott Fella Sat, 09/13/2008 - 18:31
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

One other thing you can do is to make sure you remove option 43 from dhcp, remove dns entry if one was configured, remove any dhcp scope on the subnet the management and ap manager is on, disable otap on the wlc, and remove any ip-helper that is pointing to the wlc. All these features are to help LAP's find the WLC so that they can be part of your WLAN. Once your LAP's are up, there is no reason to have these still configured.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode