Ipv6 - Ping interface

Unanswered Question
Sep 13th, 2008
User Badges:

Hi there,


I've configured two routers connected through fastethernet interface with an ipv6 address, however I can't ping each other although interfaces are up.


P1R4#sh ipv6 int brief

FastEthernet0/6 [up/up]

FE80::212:43FF:FEE3:C600

2001:410:1:2:212:43FF:FEE3:C600


P1R2#sh ipv6 int brief

ATM0 [administratively down/down]

unassigned

FastEthernet0 [up/up]

FE80::213:C3FF:FE30:8B09

2001:410:1:2:213:C3FF:FE30:8B09


P1R2#ping ipv6 2001:410:1:2:212:43FF:FEE3:C600


Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2001:410:1:2:212:43FF:FEE3:C600, timeout is 2 seconds:

.....

Success rate is 0 percent (0/5)

P1R2#


Anyone knows why I can't ping it?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Sat, 09/13/2008 - 16:50
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Did you enable IPv6 routing on those devices?


__


Edison.

Edison Ortiz Mon, 09/15/2008 - 05:22
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Please provide full config along with some topology description of your network.


__


Edison.

simontibbitts Mon, 09/15/2008 - 00:20
User Badges:
  • Silver, 250 points or more

Hello.


Any luck when trying to ping the link local addresses (it will make you input the interface)


Also, can the router see each other with CDP?


Simon

Actions

This Discussion