09-14-2008 04:45 PM - edited 03-15-2019 01:15 PM
Has anyone used multiple SIP trunks within a Route Group/Route List for redundancy? I'm curious as to the level of awareness CUCM has for a failed SIP trunk; for example, CUCM would be ignorant to PRI failures of an H323 gateway, but would be aware of an MGCP gateway's PRI status. Can anyone speak to how SIP redundancy would measure-up against MGCP for notifying CUCM of a potential trunk failure to PSTN? I'd be curious to hear any real-life experiences you guys have with redundant SIP trunks.
Thanks.
09-14-2008 08:34 PM
In CUCM there is not SIP keepalive or SIP trunk registration.
CUCM will be aware that SIP call failed when one of our Timers for call proceeding expire or if using TCP, TCP socket was not able to be open or first INVITE failed...etc
We can still handle those.
Hope this helps
09-15-2008 04:11 AM
Gonzalo,
Are you then saying that we can configure CUCM for TCP and, therefore, would be more aware of carrier trunk outages, as is MGCP?
Thanks for the input.
Mike.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: