bwilmoth Fri, 09/19/2008 - 06:12
User Badges:
  • Silver, 250 points or more

This example shows how to set the port speed to 100 Mbps on port 2/2:

Console> (enable) set port speed 2/2 100

Port 2/2 speed set to 100 Mbps.

Console> (enable)


Giuseppe Larosa Sat, 09/20/2008 - 01:47
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Alan,

console speed can be changed by modifying the config-register (this is true on routers)


to see current config-register value use sh ver in a telnet session if the value is different then 0x2102, or 0x102 change it with

conf t

config-register 0x2102

end

copy running-config startup-config

reload




I've found a reference to this other way:


line con 0

speed


However, I would do it on a telnet session not while using the console port.


Hope to help

Giuseppe


Actions

This Discussion