Prioritizing UDP Traffic

Unanswered Question
Sep 15th, 2008
User Badges:

Good day


I am struggling to improve the voice quality over a point to point link. I have 2 asterisk servers which are connected with a 256k link between office A and B. The moment when the line gets busy the voice quality gets very bad.


I enabled ip header compression on both the routers and I would like to give high priority to UDP traffic.


I used the following commands , this is on a 1701 CISCO router running ver12.1

For Header compression:

ip tcp header-compression iphc-format

ip rtp header-compression iphc-format

ip rtp compression-connections 100


I used the follolwing commands to prioritize UDP traffic;

R1(config)#priority-list 1 default low

R1(config)#priority-list 1 UDP high

The router does not seem to support this line. I would appreciate any assistance regarding the correct commands for traffic prioritization. I am not sure if this is the correct way to do this either.

Any help would be highly appreciated




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion