09-15-2008 06:47 AM - edited 07-03-2021 04:28 PM
We have a WCS running on Linux.
The clock on the Linux box is correct, but the time on the WCS is not, as evidenced in reports of client associations and other reports.
Where can I set - or even just check- the clock on the WCS?
Thanks!
Lynne
09-15-2008 07:48 AM
Hi Lynne,
Theres a small section on here for setting the clock on wcs (under the header "Instructions to Synch the Three Devices"):
http://www.cisco.com/en/US/products/ps6305/products_tech_note09186a00806f070a.shtml
HTH
09-15-2008 07:51 AM
07-29-2011 09:12 AM
Per TAC:
As you may be aware, Linux often has multiple ways to configure various functions. Products the Wireless Networking Business Unit makes that have a Linux operating system are designed to look at /etc/localtime for their timezone offsets, not /etc/sysconfig/clock.
To make this adjustment, please run the following commands at the WCS server's Linux command line:
cp /usr/share/zoneinfo/US/Eastern /etc/localtime
Then Stop WCS and reboot the server. The time zones should be correct after that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide