2 Buildings, 2 controllers-How to keep seperate??

Unanswered Question
Sep 15th, 2008

I have 2 buildings with a different subnet each. I have to 4400's each with a different name but one keeps taking the other's AP's. I suspect it is because when the AP fires up it looks for that address in dns and because I have 2 buildings it has the same name but 2 different addresses.

Any way to force each one to be correct?

thanks

Gary

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bbxie Mon, 09/15/2008 - 15:37

You can manually set each AP's primary controller and secondary controller, for example, you can configure building A's AP to use WLC1 as primary controller, use WLC2 as secondary controller; configure building B's AP to use WLC2 as primary controller, use WLC1 as secondary controller, go to Wireless-->Access Points-->ALL APs-->click the AP-->detail-->High Availability to configure, refer following link for detaile:

http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51lwap.html#wp1249029

Actions

This Discussion