09-15-2008 08:55 AM
Wondering how to get Cisco Network Assistant on a Cisco 4507 switch.
Have Added:
4507(config)#ip http server
Do I need to add an access list?
4507(config)#access-list 75 permit 10.12.15.65 (IP being my PC)
4507(config)#access-list 75 deny any
4507(config)#access-class 75
Running version 12.2(20)EW
I can get into CNA, and it brings up the toplogy window and it states that it's an unsuported device.
I am running CNA 5.4
I am missing something
Thanks
Solved! Go to Solution.
09-15-2008 09:25 AM
Thank you for including detailed information.
The Catalyst 4507R is definitely supported: the minimum IOS version is 12.2(20)EWA.
Unfortunately, 12.2(20)EW is not supported.
On the bright side, no access list is inherently needed. That is, if your PC can normally ping the switch and the HTTP server is enabled, no further configuration is necessary.
Here is a link to the release notes in which the minimum IOS versions are listed:
Sincerely,
// abacio
09-15-2008 09:25 AM
Thank you for including detailed information.
The Catalyst 4507R is definitely supported: the minimum IOS version is 12.2(20)EWA.
Unfortunately, 12.2(20)EW is not supported.
On the bright side, no access list is inherently needed. That is, if your PC can normally ping the switch and the HTTP server is enabled, no further configuration is necessary.
Here is a link to the release notes in which the minimum IOS versions are listed:
Sincerely,
// abacio
09-15-2008 09:55 AM
Thanks for the fast response.
09-15-2008 10:13 AM
Our pleasure! Thank you (again) for including such relevant information. Your post may answer the questions for many others.
SIncerely,
// abacio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide