"show" without "--More--"

Answered Question
Sep 15th, 2008
User Badges:

How do I get a show command to list its output continuously, without interrupting every page for a --More-- pause and a keystroke?

Correct Answer by Mark Yeates about 8 years 10 months ago

Samuel,


There are two ways of accomplishing this. One of them is short term and one is long term in adjusting the length to your console or telnet session.


1.) type "term length 0" in your existing session and will last only during the session.


2.) configure "length 0" under line vty or console. This will stay as long as the command is there.


HTH,

Mark

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Mark Yeates Mon, 09/15/2008 - 15:19
User Badges:
  • Gold, 750 points or more

Samuel,


There are two ways of accomplishing this. One of them is short term and one is long term in adjusting the length to your console or telnet session.


1.) type "term length 0" in your existing session and will last only during the session.


2.) configure "length 0" under line vty or console. This will stay as long as the command is there.


HTH,

Mark

Actions

This Discussion