Configure 7914 expansion module in CCME

sachin_mon · ‎09-15-2008

Hi,

what are the configurations required for adding 7914 expansion module in CCME.

A template would be highly appreciated.

Thanks.

Rgds./Sachin

Marwan ALshawi · ‎09-15-2008

The following example defines the IP phone with phone-tag 10 as a Cisco Unified IP Phone 7960G with 2 attached Cisco Unified IP Phone 7914 Expansion Modules:

Router(config)# ephone 10

Router(config-ephone)# type 7960 addon 1 7914 2 7914

if helpful Rate

anwar-ahmed · ‎09-24-2008

Hi,

I have 7960 with 7914 expension module and it is working but some time it does not work and retype command under ephone is required.

After retype "type" command it works again for while.

Thanks in advance

slongewa · ‎09-25-2008

anwar -

I've been having the identical problem with a UC520 and haven't been able to figure out what is causing it yet. If I come up with something, I'll definitely let you know.

Thanks,

Steve

anwar-ahmed · ‎10-06-2008

Thanks Steve

Right now I configire Type command whenever reboot cme.

Thanks

Anwar Ahmed