09-15-2008 11:31 PM - edited 03-15-2019 01:17 PM
Hi all,
I just finished configuring CME 4.0. Its working fine excepts for two problems.
1. I cannot get 7960 phones registered on it. Phone screen always displays "Invalid TFTP Load". ??
2. Cannot see caller id on any received call. Although if I make call from any IP phone, called party can see my caller ID.
Any help in this regard will be appreciated. I have attached the configuration and telephony service output files for the reference as well.
Sheeraz
09-15-2008 11:49 PM
You dont seem to have any TFTP Server Commands in your config.
Add the following line and reboot the router.
tftp-server flash:P00303020214.bin
Please rate if helpful
09-16-2008 12:34 AM
That line is already there but problem persist. Any further ideas ?
Thanx
Sheeraz
09-16-2008 12:43 AM
Have a look at CME Matrix below.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: