again caller id problem

Unanswered Question
Sep 16th, 2008
User Badges:

hi


can someone help me with this, i have a caller id problem on my FXO ports


debug vpm shows:


get_fxo_caller_id:Caller ID receive failed. parseCallerIDString:checksum mismatch.


i tried to find what's this checksum mismatch related to and caused by but no luck


please can u help



here is some output of debug command:


*Sep 16 10:32:08.248: htsp_process_event: [0/0/0, FXOLS_ONHOOK, E_DSP_SIG_0000]fxols_onhook_ringing


*Sep 16 10:32:08.248: TGRM: reg_invoke_tgrm_call_update(0, 0, 0, 65535, 1, TGRM_CALL_PENDING, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)


*Sep 16 10:32:08.248: htsp_timer - 125 msec


*Sep 16 10:32:08.376: htsp_process_event: [0/0/0, FXOLS_WAIT_RING_MIN, E_HTSP_EVENT_TIMER]fxols_wait_ring_min_timer


*Sep 16 10:32:08.376: htsp_timer - 10000 msec


*Sep 16 10:32:08.376: htsp_timer3 - 5600 msec


*Sep 16 10:32:08.376: [0/0/0] htsp_start_caller_id_rx:BELLCORE


*Sep 16 10:32:08.376: [0/0/0] htsp_dsm_create_success returns 1


*Sep 16 10:32:09.340: htsp_process_event: [0/0/0, FXOLS_RINGING, E_DSP_SIG_0100]


*Sep 16 10:32:09.340: fxols_ringing_not


*Sep 16 10:32:09.340: htsp_timer_stop


*Sep 16 10:32:09.340: htsp_timer - 10000 msec


*Sep 16 10:32:10.556: [0/0/0] htsp_dsm_feature_notify_cb returns 2 id=DSM_FEATURE_SM_CALLERID_RX


*Sep 16 10:32:10.556: htsp_process_event: [0/0/0, FXOLS_RINGING, E_HTSP_CALLERID_RX_DONE]


*Sep 16 10:32:10.556: htsp_timer_stop


*Sep 16 10:32:10.556: [0/0/0] htsp_stop_caller_id_rx. message length 25htsp_setup_ind


*Sep 16 10:32:10.556: [0/0/0] get_fxo_caller_id:Caller ID receive failed. parseCallerIDString:checksum mismatch.


*Sep 16 10:32:10.556: [0/0/0] Caller ID String 80 18 01 08 30 39 31 36 31 34 33 33 02 0A 30 35 30 34 39 31 30 37 34 37 07 00 00


*Sep 16 10:32:10.556: [0/0/0] get_local_station_id calling num= calling name= calling time=09/16 10:32 orig called=


*Sep 16 10:32:10.560: TGRM: reg_invoke_tgrm_accept_call(1, TGRM_CALL_VOICE, TGRM_DIRECTION_IN, 0, 0, 0, 65535)


*Sep 16 10:32:10.560: TGRM: Calling vtsp_tsp_call_setup_ind().


*Sep 16 10:32:10.560: fxols_callerid_done: call being answered


*Sep 16 10:32:10.560: htsp_process_event: [0/0/0, FXOLS_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]



here some sh run of related configuration:


trunk group FXO


hunt-scheme round-robin

voice-port 0/0/0


trunk-group FXO


supervisory disconnect dualtone mid-call


connection plar opx 200


caller-id enable


!


voice-port 0/0/1


trunk-group FXO


supervisory disconnect dualtone mid-call


connection plar opx 200


caller-id enable


!


voice-port 0/0/2


trunk-group FXO


supervisory disconnect dualtone mid-call


connection plar opx 200


caller-id enable


please help


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Mon, 09/22/2008 - 10:14
User Badges:
  • Silver, 250 points or more

Receiving caller ID in FXO ports is not supported in MGCP gateways but only in H323 gateways. If you want to receive caller ID in your gateway using FXO ports, you must configure your router as H.323 gateway. Currently, only PRIs and FXS ports support caller ID on MGCP gateways.


Michael Ciulei Thu, 09/25/2008 - 11:21
User Badges:

Hi,

I have the same problem with a single 2851 router using CME 7.0. I have a EVM-HD-8FXS with 2 -6FXO cards and another 2 FXO HWIC.


A part of config:

voice-port 2/0/8

connection plar opx 100

caller-id enable

!

voice-port 2/0/9

connection plar opx 100

caller-id enable

!

voice-port 2/0/10

connection plar opx 100

caller-id enable

!

voice-port 2/0/11

connection plar opx 100

caller-id enable


The debug vpm signal shows the exact error message.

What could be wrong?

csco11063007 Mon, 10/20/2008 - 15:19
User Badges:

You have subscribe Caller ID service from your PSTN provider.Some providers will charge for this service.





HTH

Please rate useful comments.

Tom

Actions

This Discussion