WIC-1DSU-T1 and 2800 series router

Answered Question
Sep 16th, 2008

Hello everyone. I have a very simple question regarding a 2800 router and WIC-1DSU-T1 cards. The 2800 has HWIC and NM slots, I was working under the assumtion that an HWIC slot would accomadate a WIC card, but the router will not discover these devices and assign them a port as many other routers that I have worked with do. I have tried various IOS with the same results. Any suggestions? Thanks in advance!

I have this problem too.
0 votes
Correct Answer by Joseph W. Doherty about 8 years 2 months ago

It's possible you might need to define the WIC card added via the controller command. Don't have access to a 2800 at the moment for an example, but if this is the situation, good chance someone else will provide more info.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joseph W. Doherty Tue, 09/16/2008 - 12:12

It's possible you might need to define the WIC card added via the controller command. Don't have access to a 2800 at the moment for an example, but if this is the situation, good chance someone else will provide more info.

Actions

This Discussion