UC520 Fax to email

Unanswered Question
Sep 16th, 2008

Hi, i want to use an fxo connected to pstn to receive a fax and send it to email throught the uc520. I have try to use the thoses line of command :

application

service FaxMail flash:app_faxmail_onramp.2.0.1.3.tcl

fax receive called-subscriber $d$

fax interface-type fax-mail

mta send subject Vous avez recu un fax -

mta send with-subject $s$

mta send origin-prefix "Cisco-Powered Fax System"

mta send mail-from hostname blahblah.net

mta send mail-from username faxserver

mta send return-receipt-to username $s$

voice-port 0/1/3

cptone CA

timeouts call-disconnect 1

timeouts wait-release 2

connection plar 5551234

description FAX to SERVICE Dept

caller-id enable

dial-peer voice 777 pots

description FAX to SERVICE

service faxmail

information-type fax

incoming called-number 5551234

fax rate disable

direct-inward-dial

dial-peer voice 200 mmoip

description FAX to SERVICE Dept

service fax_on_vfc_onramp_app out-bound

destination-pattern 5551234

information-type fax

session target mailto:[email protected]

I see the call arrived on the fxo but match no "outgoing" dial-peer.

My ios version is :

uc500-advipservicesk9-mz.124-11.XW8

Someone have install this on uc520 and working fine ?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion