ASA5520 Upgrade from 7.0 to 8.0.3 and ASDM from 5.7 to 6.0.3

Unanswered Question
Sep 16th, 2008
User Badges:

Hello, im about to upgrade one asa from 7.0 to 8.0.3 and also the ASDM from 5.7 to 6.0.3, the question is, do i need to first 7.0 to 8.0.1 next 8.0.2 next 8.0.3 and also the same to ASDM?

Or just copy from 7.0 to 8.0.3 ?

Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
suschoud Wed, 09/17/2008 - 05:04
User Badges:
  • Gold, 750 points or more

7.0.x to 7.2.x


7.2.x to 8.0.x



x--> any number


Do not go directly from 7.0.x to 8.0.x.( not recommended by cisco )




Please rate if helpful.


Regards,

Sushil

guilherme.pernes Wed, 09/17/2008 - 05:43
User Badges:

Hi Sushi, thanks for your reply.


The upgrade was a success :).


7.0(7) to 8.0.3 and asdm-507 to asdm-603, just one small problem, because the 8.0 was not active.


"asdm image disk0:/asdm-603.bin

Device Manager image set, but not a valid image file disk0:/asdm-603.bin"


after reboot (8.0.3), ASDM run with no problems.


Thanks one more time Sushi.

Actions

This Discussion