09-16-2008 10:50 PM - edited 03-06-2019 01:25 AM
Thanks in advance
Hey its my first post so please gentle to me.
I have one server and one L3 switch and in L3 switch i want to make 10 vlans and one port i want to assign as uplink port which should be able to talk with all Vlan...please help?
09-16-2008 11:41 PM
What will the uplink port be connected to? If another recent Cisco switch, they should default to trunking, which will mean all VLANs will be carried up that port, so another switch will be able to use the same VLANs.
Though reading your comment, and your specific referencs to L3, I wonder if you are trying to use the uplink as a L3 interface?
In that case yo wuld want to do something like
conf t
vlan 10
vlan 11
vlan 12
....
vlan19
int vlan 10
ip add 10.1.10.1 255.255.255.0
int vlan 11
ip add 10.1.11.1 255.255.255.0
...
int vlan 19
ip add 10.1.19.1 255.255.255.0
int fas 0/1 desc L3 uplink
no switch
ip add 10.1.99.1 255.255.255.0
obviously you would change VLAN numbers and IP addresses to be appropriate for your network.
09-17-2008 06:49 AM
what would be the route as per your network ?
09-17-2008 06:51 AM
Sorry, I don't understand what you are asking there.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide