Enhanced PAgP

Unanswered Question
satish_zanjurne Wed, 09/17/2008 - 01:25
User Badges:
  • Silver, 250 points or more

Hi Followwing model supports VSS with Enhanced PagP

Model Number Description

WS-C6503-E E-Series 3-slot chassis

WS-C6504-E E-Series 4-slot chassis

WS-C6506 6-slot chassis

WS-C6506-E E-Series 6-slot chassis

WS-C6509 9-slot chassis

WS-C6509-E E-Series 9-slot chassis

WS-C6509-NEB-A 9-slot vertical Network Equipment Building Standards (NEBS) chassis

WS-C6509-V-E E-Series 9-slot vertical chassis

WS-C6513 13-slot chassis

HTH...rate if helpful...

satish_zanjurne Wed, 09/17/2008 - 02:22
User Badges:
  • Silver, 250 points or more

Hi Abeid,

I found only above listed devices which supports Enhanced PagP.

It looks like you don't have any of above switches in distribution layer..

But Pagp runs on only above mentioned switches..

Samer Labaky Thu, 10/09/2008 - 07:29
User Badges:


you have to upgrade to version 12.2(46)SE

in order to support Enhanced pagp, once enabled the 3750 will be able to serve as a client for dual-active detection.

eduardo.ramirez Sun, 08/04/2013 - 18:00
User Badges:

Hi Samer I have VSS running on my Choke's Data Center which are connected to my Core’s 65009-E too PAgP is working apparently good on my L3 port-channels but problem is when I have Dual-Active situation for some reason when both get active roll start to have OSPF process ID issues

Any idea or recommendation?



This Discussion