09-17-2008 11:09 PM - edited 03-15-2019 01:22 PM
I have a customer that have a CUCM cluster as well as a CME cluster. The CME is the PSTN gateway.
Now, on the CUCM, i have a group of phone which their extensions are not grouped together as follows:
5401
5403
5409
5511
5538
etc
Because the numbers are not together, does it means that on the CME, for the 5 phones, i will need 5 x seperate dial peer to point it to the CUCM cluster??
Is there any way i can group this together into a single dial peer?
Kind Regards,
Hunt
09-17-2008 11:42 PM
Use destination-pattern 5...
Under voip dial-peer
This is what we call wildcards...
09-18-2008 05:21 PM
But since i also have phones on the CME itself like 5800 to 5899, and also 5500, 5511...
Would these wildcards cause these calls to be routed incorrectly towards the CUCM cluster as well??
09-18-2008 10:31 PM
The better match will win.
You should have no problem with "5..." to the CUCM.
CME creates dial-peers (the phones look like FXS ports) to 5500, 5511... These are the more exact matches.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: