DMM 5.0 web interface doesn't work

Unanswered Question
Sep 18th, 2008
User Badges:

I've upgraded a DMM from 4.1 to 5.0. This proccess was successful. When I try to access the web interface, the main page doesn't appear. The telnet to the 8080 TCP port responds correctly. It has a static IP address and a FQDN. The DNS server has an entry for the DMM.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
htarra Wed, 09/24/2008 - 05:52
User Badges:
  • Bronze, 100 points or more

Have you tried FireFox? It could be a problem with IE7. Make sure forward and reverse DNS is working. And also make sure you are not just using an IP and you have a FQDN entry in your DNS server for it otherwise it will not work.

thijs.vandecasteele Mon, 09/29/2008 - 04:06
User Badges:

In the Quick start guide for DMS 5.0 I read the following:


"3. Specify the fully qualified, DNS-routable hostname for the DMM appliance. Select Change, and then select OK. You can enter either the DNS-routable hostname or the IP address, for example: server.example.com"


So it is possible to work without DNS?

But when I try to acces the webinterface (http://ip:8080/ I see the login page, but when I try to login with superuser/admin I get the following message:


"The Application encountered an exception ( code : 500 ) :: edu.yale.its.tp.cas.client.CASAuthenticationException: Unabl"


Is this due to the fact that I don't work with DNS?

Actions

This Discussion