09-19-2008 12:40 PM - edited 03-06-2019 01:29 AM
Help - Installed ethernet wic, can't access or configure. Please advice
09-19-2008 01:15 PM
What router are you using? Also what is the WIC you are trying use and what IOS version are you running?
Mark
09-19-2008 01:22 PM
1720 router with 1enet wic,
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 10-May-02 19:06 by pwade
Image text-base: 0x800080E0, data-base: 0x806F2D18
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
any help would be great!
09-19-2008 01:28 PM
It looks like you will need an IOS upgrade for this card to work.
The Cisco WIC-1ENET card requires Cisco IOS Release 12.2(2)XJ or later if the card is installed in any WIC slot other than slot 0 or if more than one card is installed.
The card can be used with Cisco IOS Release 12.2(4)T, but the card must be installed in slot 0 and only one Cisco WIC-1ENET card can be installed in the router.
HTH,
Mark
09-19-2008 01:33 PM
The card is in slot 0 and it is the only WIC installed. does 12.2(7) support this.
09-19-2008 01:41 PM
It requires 12.2(7)T. That is a completely different release than what you currently have.
Mark
09-19-2008 01:48 PM
How can I get a copy of the IOS. The cisco website will not let me download?
09-19-2008 01:54 PM
You will need a valid SMARTnet contract on the router to be able to download software updates for your router from Cisco.
Mark
09-19-2008 02:02 PM
Will this version work?
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 65536 Kbytes of main memory
09-19-2008 02:06 PM
That seems to not be an IOS version, but bootstrap for the router itself.
09-19-2008 02:13 PM
Cisco IOS Software, C1700 Software (C1700-IPBASE-M), Version 12.4(5), RELEASE SO
FTWARE (fc3)
How about this one?
09-19-2008 02:23 PM
I'm not so sure that is for a 1720. You could give it a try but remember that routers have minimum flash and RAM requirements. It very well could work. Here are instructions on how to upgrade the IOS.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00801fc986.shtml#topic1
Mark
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: