CME-as-SRST with distributed Unity

Unanswered Question
Sep 19th, 2008
User Badges:
  • Bronze, 100 points or more

I have a centralized CM topology with 3 distributed Unity associated with our 3 corresponding hub sites (ie West Coast-USA, East Coast-USA, UK). CME-as-SRST is configured and working properly at the 3 hubs.


On one of the hubs (East), there are 3 small branches (ie Illnois, Minn, and Bermuda) home to the East Unity server. These 3 are currently setup as regular SRST (NOT CME-as-SRST) if CM fails.


Is there a way to setup VM access for these smaller remote sites if I migrate from SRST to CME-as-SRST mode? I guess I can do some type of SIP but would prefer sccp in the CME fashion. I am looking at the doc below:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesrst.html


Thx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Marwan ALshawi Sat, 09/20/2008 - 00:58
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

are phones in the site that going to be cme-srst have DID numbers ?

Actions

This Discussion