09-19-2008 10:43 PM - edited 03-03-2019 11:37 PM
Hi,
Currently we are running X.25 encapsulation on our point to point TDM network. Going forward we want to migrate to MPLS network.
Need suggestion on the migration.
09-19-2008 11:06 PM
Hello Akbihari,
if you are going to use a L3 MPLS VPN service you can use XoT (X.25 over TCP) between your CE routers at the two sites.
In this way X.25 frames will be carried inside TCP segments as IP traffic and will be routed by the MPLS service.
You may need to use QoS to provide a better treatment to XoT packets.
see
http://www.cisco.com/en/US/tech/tk827/tk369/tk746/tsd_technology_support_sub-protocol_home.html
Hope to help
Giuseppe
09-20-2008 01:40 AM
Thanks..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: