One way conversation from CUCM to remote location

Unanswered Question
Sep 20th, 2008
User Badges:

Whenever I route traffic for network 145.47.184.0 to satellite link 172.20.1.3 which is bundle with other links using E1 as shown in the config attachment below there will be one way conversation I can hear from that end but they can't hear me, but if I route the traffic through another secondary link to the using E1 on different router there will be two way conversation. What could be responsible for this problem



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Marwan ALshawi Sat, 09/20/2008 - 01:30
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

might be routing issue?

voxtron1999 Sat, 09/20/2008 - 10:22
User Badges:

The two links to the remote locations are PVC with similar IP routing table

aamercado Sat, 09/20/2008 - 10:58
User Badges:
  • Bronze, 100 points or more

codec mismatch issues?

voxtron1999 Sun, 09/21/2008 - 05:07
User Badges:

this same router serves as gateway to CME in another remote site that is configured on subinterface 0/0/0:0.1, and the there is two way traffic at both end

Actions

This Discussion