NM-CE-BP password recovery

SergeySokolov · ‎09-20-2008

I'm can't login to NM-CE-BP on my 3825

Default admin/default not work (may be changed prior me)

#service-module content-Engine 1/0 session

ask me about Content Engine Console Username and Password again and again.

Is it possible to reset module to its default state with default password?

c3825#service-module content-Engine 1/0 status

Service Module is Cisco Content-Engine1/0

Service Module supports session via TTY line 66

Service Module is in Steady state

Service Module heartbeat-reset is enabled

Getting status from the Service Module, please wait..

Application and Content Networking System Software (ACNS)

Application and Content Networking System Software Release 5.1.5 (build b2 Mar 30 2004)

Version: ce2636-sw-5.1.5

SergeySokolov · ‎09-20-2008

I've understood

TnX

dstolt · ‎09-22-2008

For ACNS 5.1, you should session into the NME from the router and use the following link with instructions to reset the admin pw.

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/acns/v51/configuration/central/guide/51trbl.html#wp1043510

Hope that helps,

Dan

SergeySokolov · ‎09-23-2008

Already done, thank You.

One more question: I found that HDD have a bad sector. Whether probably to replace HDD (may be with more capacity)? And if yes, what volume should be work?

dstolt · ‎09-23-2008

Unfortunately the NMEs do not have replaceable harddrives. The newest hardware supported for ACNS 5.5.7 would be NME-WAE-502. Check out http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps491/product_data_sheet0900aecd806c7c42.html

Dan