09-20-2008 03:46 AM - edited 03-06-2019 01:29 AM
Hi,
I have tried to backup IOS of Cisco 3560 switch but it's giving error..
"%Error opening flash:c3560-ipbase-mz.122-25.SEE2.bin (No such file or directory)"
Steps..
INSWITCH-SW-06#c3560-ipbase-mz.122-25.Sopy flash: tftp:
Source filename [c3560-ipbase-mz.122-25.S]? c3560-ipbase-mz.122-25.SEE2.bin
Address or name of remote host []? 10.138.75.102
Destination filename [c3560-ipbase-mz.122-25.SEE2.bin]?
%Error opening flash:c3560-ipbase-mz.122-25.SEE2.bin (No such file or directory)
INHYDAGL-SW-06#10.138.75.102c3560-ipbase-mz.122-25.SEE2.binopy flash: tftp:
Source filename [c3560-ipbase-mz.122-25.SEE2.bin]?
Address or name of remote host []? 10.138.75.102
Destination filename [c3560-ipbase-mz.122-25.SEE2.bin]?
%Error opening flash:c3560-ipbase-mz.122-25.SEE2.bin (No such file or directory)
Nedd ur help to resolve this issue..
Solved! Go to Solution.
09-20-2008 04:11 AM
Your flash image which is "c3560-ipbase-mz.122-25.SEE2.bin" is inside the directory "c3560-ipbase-mz.122-25.SEE2"
Try this command...
INSWITCH-SW-06# copy flash tftp
Source filename [c3560-ipbase-mz.122-25.S]? flash:/c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.bin
Address or name of remote host []? 10.138.75.102
Destination filename [/c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.bin]? c3560-ipbase-mz.122-25.SEE2.bin
The magic is in the "Source filename" you should include the directory.
09-20-2008 04:11 AM
Your flash image which is "c3560-ipbase-mz.122-25.SEE2.bin" is inside the directory "c3560-ipbase-mz.122-25.SEE2"
Try this command...
INSWITCH-SW-06# copy flash tftp
Source filename [c3560-ipbase-mz.122-25.S]? flash:/c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.bin
Address or name of remote host []? 10.138.75.102
Destination filename [/c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.bin]? c3560-ipbase-mz.122-25.SEE2.bin
The magic is in the "Source filename" you should include the directory.
09-27-2008 03:42 AM
For upgradation what synatx I need to follow..
I am following the below syntax and getting error.
AGL-SW-06#copy tftp: flash:
Address or name of remote host [10.138.75.102]?
Source filename [c3560-ipbasek9-mz.122-25.SEE4]? c3560-ipbasek9-mz.122-25.SEE4.bin
Destination filename [c3560-ipbasek9-mz.122-25.SEE4.bin]?
Accessing tftp://10.138.75.102/c3560-ipbasek9-mz.122-25.SEE4.bin...
%Error opening tftp://10.138.75.102/c3560-ipbasek9-mz.122-25.SEE4.bin (Timed out)
AGL-SW-06#
Pleaase guide to resolve this issue..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: