09-20-2008 05:38 AM - edited 03-15-2019 01:26 PM
Hi,
Running CallManager Express 4.0.
We need to upgrade from 4.0 to 4.1.
Please provide the procedure to upgrade
CallManager Express from 4.0 to 4.1
and also IoS version.
Regards,
09-20-2008 07:31 AM
Hey buddy,
The required steps are nicely listed in this doc;
Installing and Upgrading Cisco Unified CME Software
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00808777e0.html
This thread has a nice note from Paolo!
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde8b54/2#selected_message
Why don't you start by upgrading IOS to 12.4(11)XJ4, for CME 4.1. This seems to be a highly rated and stable IOS/CME combination.
12.4(11)XW2 - CME 4.2
12.4(15)T - CME 4.1
12.4(11)XJ - CME 4.1
From this doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Hope this helps!
Rob
09-20-2008 09:12 PM
Hi Rob,
Ton of thanks to you!!!!!
Krishna
09-20-2008 09:24 PM
Is it necessary to upgrade Unity Express NME-CUE module(version 3.1)also?
09-22-2008 05:26 AM
Hi Krishna,
You are most welcome my friend! The upgrade to CUE would not be a firm requirement. CUE 3.1 is fully compatible with CME 4.1;
Cisco Unity Express Compatibility Matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
