Unanswered Question
Sep 20th, 2008

where can I get good documentation of vlan maps.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Marwan ALshawi Sat, 09/20/2008 - 18:04

if u mean VLAN access control lists (VACLs)

then the following config example:

VLAN access control lists (VACLs) are similar to route-maps in that

they are composed of statements that contain match and set conditions.

In a VACL, the “set” conditions are called “actions.” Actions include

forward, drop, and redirect. Like route-maps, VACL statements are

numbered for ordering. After configuration, VACLs are applied to

traffic to specified VLANs.

The following is a sample VACL that instructs the switch to drop traffic

matching ACL 101 (not shown), and forward all other traffic:

Switch(config)#vlan access-map Drop101 5

Switch(config-access-map)#match ip address 101

Switch(config-access-map)#action drop

Switch(config-access-map)#vlan access-map Drop101 10

Switch(config-access-map)#action forward


Switch(config)#vlan filter Drop101 vlan_list 10

To view VACL settings, use the commands show vlan access-map

vacl_name or show vlan filter access-map vacl_name.

good luck

if helpful Rate


This Discussion