We will be upgrading our branch offices from a Single T1 to x2 T1 connections.
We have VoIP implemented in our branch offices.
I am wondering if I need to be concerned about making this change to the interface.
The current config is shown below, is the Frame-Relay (frame-relay traffic shaping) doing anything significant that I could get burned by changing the config from Frame-relay encap to multilinkPPP encap?
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type cisco
hold-queue 256 in
hold-queue 256 out
interface Serial0/3/0.400 point-to-point
ip address 1.x.x.6 255.255.255.252
ip nbar protocol-discovery
ip flow ingress
ip flow egress
frame-relay interface-dlci 400 IETF
crypto map mycompany_Crypt