09-20-2008 08:39 PM
we previuosly prepositioned video content in what is now called legacy mode, how do you set it up in Cifs mode, or do I still have to use legacy mode, when going through the config it always seems to ask for a core cluster which is legacy mode, is there anty instruction for converting from Legacy to Cifs for prepositioning
09-21-2008 07:20 PM
further my question, I assume the location is used as opposed to a core cluster, when i look at the status of the preposition, its still "in progress" after 2 days without anything transfered, previously it determined there was nothing to transfer and stopped until the next scheduled time.
09-23-2008 02:05 AM
Richard,
Preposition is supported with the new CIFS AO. You configure the PP jobs under Configure > File Services. Everything you need to configure for the job is only a single page. The "Location" defines which WAE(s) will be used to browse the origin file server when you define the Content Settings for the PP job. If you manually type in the path, the Location is not needed.
Zach
09-23-2008 09:45 PM
Zach,
ok I have configured the File server, under file services as well, but with no core cluster, then configured the PP with location, edge devices and schedule,but I still see in status it "in progress" for 3 +days , since the first scheduled time, with 0 bytes transferred, in previous release it stopped if nothing to transfer, I dont think its working, nothing in the device log
09-26-2008 07:23 PM
Can you please send me the following:
- Screen shot of the PP job configuration
- /local1/errorlog/cifs/cifs_err.log file
Thanks,
Zach
09-28-2008 02:02 PM
Zach,
I found the problem was the username had changed on the server, the server guys had done some changes, without my knowledge, preposition works ok now
Thanks
09-29-2008 09:02 AM
Good to hear - thanks for the update.
Zach
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: