09-22-2008 01:48 PM - edited 03-11-2019 06:47 AM
does anyone recall the commands to open ports 5001 on an ASA?
thanks
09-22-2008 03:10 PM
Gary,
Here are the parts from my existing config for my slingbox. Feel free to change the IP for your application.
object-group network Slingbox
network-object host 10.10.1.220
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (outside) 1 access-list nat outside
nat (outside) 1 10.10.0.0 255.255.0.0
static (inside,outside) tcp interface 5001 10.10.1.220 5001 netmask 255.255.255.255
access-group outside_nat_static in interface outside
access-list outside_nat_static extended permit tcp any interface outside eq 5001
access-list outside_nat_static extended permit udp any interface outside eq 5001
access-list inside_nat0_outbound extended permit ip object-group Slingbox 10.10.1.0 255.255.255.0
access-list nat extended permit tcp any interface outside eq 5001
HTH,
Mark
09-23-2008 05:33 AM
thanks, i'll give it a shot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide