USING SNMP FOR FETCHING RUNNING CONFIG

Answered Question
Sep 22nd, 2008
User Badges:

Hi,

I dont have access to a router. But I have SNMP read write permission. I am equiped with an SNMP r/w community string. Is it possible to view the running configuration using SNMP polling using any specific MIB? Please help me in this.... Thanks in advance

Correct Answer by Joe Clarke about 8 years 8 months ago

You will have to transfer the configure using a protocol such as TFTP or RCP. You will not be able to see it with SNMP alone.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (4 ratings)
Loading.
prasad.gsmc Mon, 09/22/2008 - 22:37
User Badges:

Thanks for the reply,


I would prefer to View the config on the SNMP tool console? COz We cant export to TFTP server since there is a firewall in between... any hope? Or i will try to set up a TFTP server

Correct Answer
Joe Clarke Mon, 09/22/2008 - 22:59
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You will have to transfer the configure using a protocol such as TFTP or RCP. You will not be able to see it with SNMP alone.

Actions

This Discussion