cuom 2.0.3 WIM auth error (and SOAP)

Unanswered Question

Hi all

after upgrading to 2.0.3 (via 2.0.2) from 2.0 (and rediscovered all devices) all callmanagers are partly monitored due to WMI auth error (Success:Incorrect WMI Credential or Insufficient Priviledges).

I have tested WMI from cuom server to callmanagers as suggested in some troubleshooting docs, all seems fine with those tests.

I tested from a clean 2.0.3 testserver and that seems ok to.

Also after the automatic weekly discovery I get SOAPnotreachable from one ccm. and service down alert from all ccm's

ccm's are on windows version 4.1(3.20735).

anyone got any ideas, before reinstalling the server ?

rgds

Mats

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
aghaznavi Mon, 09/29/2008 - 10:04

Device experienced Simple Object Access Protocol (SOAP) connectivity failure while polling. SOAP attributes will not be polled

Cisco Unified Communications Manager device experienced SOAP communication failure with the management application. CallManager may be overloaded or the web service may be down. Rediscover the device in Cisco Unified Operations Manager.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/2.0.3/user/guide/Events.html

Actions

This Discussion