Upgrade ROMMON on new Sup 720 3B / 6509

peter-net · ‎09-23-2008

Having spot of trouble getting this to work - I have the new ROMMON image loaded OK but the original ROM files loads into memory.

mchin345 · ‎09-29-2008

To upgrade the ROMMON version on a Supervisor Engine 720 or the Supervisor Engine 720-10GE running the Catalyst operating software, perform these steps:

Step 1 Check the active ROMMON information:

Console> (enable) rommon show

Step 2 Download the new ROMMON image from the TFTP server:

Console> (enable) copy tftp flash

Step 3 Program the new ROMMON image to the bootflash device on the Supervisor Engine 720 or the Supervisor Engine 720-10GE:

Console> (enable) rommon upgrade bootflash:c6ksup3-rm2.srec.8.5.1

Step 4 Check the new active ROMMON information:

Console> (enable) rommon show

Step 5 Reset the Supervisor Engine 720 or the Supervisor Engine 720-10GE:

Console> (enable) reset

Step 6 After the system comes up, check the ROMMON information again:

Console> enable