Configuring DMVPN with Certificates

Unanswered Question
Sep 23rd, 2008

I have configured the IOS CA correctly and generated the certificates for the clients. The one thing I can't seem to find on the CCO is how to configure IPSEC using these certificates in a vpn policy instead of using pre-shared keys? Is there any documentartion that describes how to do this?

Kevin

I have this problem too.
1 vote
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Tue, 09/23/2008 - 09:02

Hello Kevin,

a useful link can be the following:

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_mng_cert_serv_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1105351

and:

go near the end to see examples with CA and certificates be aware that most commands can be different in 12.4T

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6525/ps9370/ps6658/prod_presentation0900aecd80313ca9.pdf

Hope to help

Giuseppe

Anonymous (not verified) Tue, 09/23/2008 - 12:08

Thanks, I will take a look

Kevin

Anonymous (not verified) Tue, 09/23/2008 - 14:42

Anonymous (not verified) Tue, 09/23/2008 - 14:46

Anonymous (not verified) Tue, 09/23/2008 - 14:50

Anonymous (not verified) Tue, 09/23/2008 - 15:39

Anonymous (not verified) Wed, 09/24/2008 - 09:07

Anonymous (not verified) Wed, 09/24/2008 - 09:11

Anonymous (not verified) Wed, 09/24/2008 - 09:14

Actions

This Discussion