cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3968
Views
0
Helpful
9
Replies

Configuring DMVPN with Certificates

admin_2
Level 3
Level 3

I have configured the IOS CA correctly and generated the certificates for the clients. The one thing I can't seem to find on the CCO is how to configure IPSEC using these certificates in a vpn policy instead of using pre-shared keys? Is there any documentartion that describes how to do this?

Kevin

9 Replies 9

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Kevin,

a useful link can be the following:

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_mng_cert_serv_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1105351

and:

go near the end to see examples with CA and certificates be aware that most commands can be different in 12.4T

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6525/ps9370/ps6658/prod_presentation0900aecd80313ca9.pdf

Hope to help

Giuseppe

Thanks, I will take a look

Kevin

Not applicable

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: