09-23-2008 01:19 PM - edited 03-15-2019 01:30 PM
Hello NetPros,
I have CUCM 6.01
About a 300 Phones on it. From this phones 200 - is one for trademark, and 100 for 2nd trademark,
and I have 2 sip trunks for outside calls,
and I need to provide similar route pattern for all of the phones like: 9.@
But I need for first trademark to be chosen first SIP trunk for outside calling and for second-second sip trunk.
So, the question is - how to do it by the simplest way?
Thank you.
09-23-2008 01:47 PM
that's the whole purpose of route lists, create one route list per company and have it ordered the way you need them to choose the SIP trunk, PRI, etc
HTH
java
if this helps, please rate
09-23-2008 01:59 PM
Hm,
maybe some missunderstanding happend because of my english, sorry.
Lets imagine:
I have phone #1000 and #2000
all of them can dial 9.@
But when the #1000 phone dialing 9XXXXXXX it should go through the first SIP trunk
And when the #2000 phone dialing 9XXXXXXX it should go through the second SIP trunk.
So, thats the task.
09-23-2008 03:49 PM
It's like a source based routing.
09-23-2008 05:51 PM
use CSS and partitions. those are the basic construction blocks of CUCM
2 route patterns on different partitions and 2 CSS, one of each per phone
seems you're not familiar with this so read this to understand how this works
Calling Privileges in Unified CM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/dialplan.html#wp1044276
HTH
java
if this helps, please rate
09-23-2008 06:02 PM
Thank you man,
I'll back ASAP with updates.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: