Express 526

Unanswered Question
Sep 23rd, 2008

Just looking at deploying express 526 to multiple sites, I suggested the 2100 series for scalability and fallback to a 4400 from multiple 2100s but money may be an issue for the client.

I am unclear if the 526 can be managed via a WCS ? Antone know for sure

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Tue, 09/23/2008 - 16:01

Hi Pete,

The 526 cannot be managed by the WCS. This is shown in this good Q & A doc;

Q. Can the Cisco Mobility Express Solution also be used by enterprises as branch-office solutions?

A. It is strongly recommended that enterprises not deploy the Cisco Mobility Express Solution as a branch-office solution. The Cisco Mobility Express Solution was built for SMB customers. It does not provide many of the advanced features ideally suited for distributed enterprise networks that the Cisco Unified Wireless Network Solution supports, such as centralized management through the Cisco Wireless Control System. For this reason, the two solutions were intentionally kept distinct and are designed for different environments.

Hope this helps!



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode