EoMPLS - ME6524 to 7304.

Unanswered Question

I'm having an issue getting MPLS to work from a ME6524 to a 7304.


The following is my configuration.


ME6524

-------

interface vlan 84

mtu 1534

xconnect 10.1.1.1 111 encapsulation mpls


7304

-----

Gigabit0/1

mtu 1534


Gigabit0/1.111

encapsulation dot1q 84

xconnect 10.2.2.2 111 encapsulation mpls


Outputs from 'show mpls l2transport vc' & 'show mpls l2transport vc detail' seem fine. Both sides are UP/UP. I see labels in the forwarding table.


The only weird thing...is on switch sitting off the 7304 I don't see any mac-addresses coming from the EoMPLS connection. But when I check the mac-addresses on the ME6524 I can see the mac-addresses of the devices connected to the 7304. Just not the other way around.


Could this be a code issue?




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Harold Ritter Wed, 09/24/2008 - 10:26
User Badges:
  • Cisco Employee,

Jeff,


Could please provide the output of a "show mpls l2 binding" from the 7304.


Regards

Actions

This Discussion