CME 4.1 Hardware Conference

Unanswered Question
Sep 24th, 2008
User Badges:

Hi all - this is killing me so any help greatly appreciated....

I've a request to be able to conference more than 3 people - no problem as I have CME 4.1.

Configured DSPFarm, SCCP and telephony-service and all looks ok.

It works great for an IP Communicator and a "show ephone-dn conf" (attached) and show dspfarm all shows that relevant resource is being used.

However a 7960/61 can't conference at all gets fast busy

I've added snippets of the relevant config.

Thanks in advance...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
a.leahy Thu, 09/25/2008 - 05:07
User Badges:

fixed - config was good, pesky phone firmware wasn't......


This Discussion