caller-id enable reboots router

Unanswered Question
Sep 24th, 2008

Hello all

I am having this problem and I cannot figure out what is causing it. I have been searching for the last 2 hours trying to figure this out and hoping someone here can help.

Currently, I have a 1760 router with a vic2-4fxo card with 4 oots lines coming in. Everything is working fine in terms of calling, and call routing, but as soon as I turn on caller-id on one of the voice cards, the router immediately reboots. Not sure what is causing this, but I found a couple of forums that mentioned you need to change router from mgcp to h.323. I could not find how to do this, and thought someone here would be able to either help me wiht that, or make recommendations on what I am doing wrong. Any help you can give would be appreciated.

I am attaching my config thus far.

Thanks

Nick

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nickehunt Wed, 09/24/2008 - 16:22

here is my full config....

!

!

!

trunk group _POTS

!

!

!

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

sip

bind control source-interface Loopback0

bind media source-interface Loopback0

header-passing

!

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g729r8

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

interface Loopback0

ip address 192.168.100.1 255.255.255.255

h323-gateway voip interface

h323-gateway voip bind srcaddr 192.168.100.1

!

!

interface FastEthernet0/0.8

description Voice Vlan Interface

encapsulation dot1Q 8

ip address 192.168.8.1 255.255.255.0

ip helper-address 192.168.2.5

ip helper-address 192.168.2.4

!

!

!

!

tftp-server flash:P0030702T023.bin

tftp-server flash:P0030702T023.loads

tftp-server flash:P0030702T023.sb2

tftp-server flash:P0030702T023.sbn

!

control-plane

!

!

!

voice-port 2/0

!

voice-port 2/1

!

voice-port 2/2

!

voice-port 2/3

!

voice-port 3/0

trunk-group _POTS

echo-cancel coverage 32

connection plar opx 100

description inbound POTS line

!

voice-port 3/1

trunk-group _POTS

echo-cancel coverage 32

connection plar opx 100

description inbound POTS line

!

voice-port 3/2

trunk-group _POTS

echo-cancel coverage 32

connection plar opx 100

description inbound POTS line

!

voice-port 3/3

!

!

!

!

!

!

dial-peer voice 100 voip

preference 3

destination-pattern 1...

voice-class codec 1

session target ipv4:192.168.2.3

dtmf-relay h245-alphanumeric

no vad

!

dial-peer voice 101 pots

trunkgroup TruArx_POTS

description Outbound calls to PSTN

preference 5

destination-pattern 9...........

progress_ind setup enable 3

progress_ind progress enable 8

!

dial-peer voice 110 voip

destination-pattern 210

session protocol sipv2

session target ipv4:192.168.2.3

session transport tcp

dtmf-relay rtp-nte

codec g711alaw

!

dial-peer voice 111 voip

destination-pattern 211

session protocol sipv2

session target ipv4:192.168.2.3

session transport tcp

dtmf-relay rtp-nte

codec g711alaw

!

sip-ua

mwi-server ipv4:192.168.2.3 expires 3600 port 5060 transport tcp

!

!

telephony-service

load 7960-7940 P0030702T023

max-ephones 24

max-dn 72

ip source-address 192.168.8.1 port 2000

auto assign 1 to 24

timeouts ringing 45

system message Phone System

dialplan-pattern 1 212555.... extension-length 4 no-reg

voicemail 210

max-conferences 8 gain -6

moh music-on-hold.au

dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern 200

secondary-dialtone 9

night-service day Mon 08:30 17:00

night-service day Tue 08:30 17:00

night-service day Wed 08:30 17:00

night-service day Thu 08:30 17:00

night-service day Fri 08:30 17:00

create cnf-files version-stamp 7960 Sep 23 2008 18:44:15

Actions

This Discussion