ajagadee Thu, 09/25/2008 - 08:55

Hi,


You cannot telnet to the outside interface of the ASA in clear text.


You have couple of choices:


Telnet through IPSEC

SSH

HTTP over SSL (https) with ASDM



ASA7.0 Allowing Telnet Access:

The security appliance allows Telnet connections to the security

appliance for management purposes. You cannot use Telnet to the

lowest security interface unless you use Telnet inside an IPSec

tunnel.



http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/config/

mgaccess.htm#wp1054101


To configure SSH, please check following URL.

PIX/ASA 7.x: SSH on the Inside and Outside Interface Configuration Example


http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_confi

guration_example09186a008069bf1b.shtml


Regards,

Arul


** Please rate all helpful posts **

Actions

This Discussion