Does anyone know what the issue might be with not getting a 7940 to pull a phone load from CME version 7.0, on a 2801. We have a mix of 7961's,7911's, and 7940's. The 7911 and 7960's pulled the new firmware but the 7940's will not. Here is the config I have. Is this correct? What code will work if it's not a config issue?
telephony-service
load 7960-7940 P00305000301
tftp-server flash:/P00305000301.sbn
tftp-server flash:/P00305000301.bin
version cme is 7.0