SNMPv3 config question

Answered Question
Sep 25th, 2008

Hi there,

I'm trying to configure snmpv3 on a 26xx with authpriv but the "priv" option is not available:

swatm(config)#snmp-server group v3group v3 ?

auth group using the authNoPriv Security Level

noauth group using the noAuthNoPriv Security Level

I'm running the following image:

c2600-i-mz.123-26.bin

Is it a question a feature set ?

I have this problem too.
0 votes
Correct Answer by Joe Clarke about 8 years 2 months ago

Yes. You need a crypto image (one with k9 in the feature set name) in order to support SNMPv3 authPriv. With IP ONLY, you'll only be able to do authNoPriv.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Thu, 09/25/2008 - 08:47

Yes. You need a crypto image (one with k9 in the feature set name) in order to support SNMPv3 authPriv. With IP ONLY, you'll only be able to do authNoPriv.

Actions

This Discussion