cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
646
Views
0
Helpful
2
Replies

SNMPv3 config question

jderrien
Level 1
Level 1

Hi there,

I'm trying to configure snmpv3 on a 26xx with authpriv but the "priv" option is not available:

swatm(config)#snmp-server group v3group v3 ?

auth group using the authNoPriv Security Level

noauth group using the noAuthNoPriv Security Level

I'm running the following image:

c2600-i-mz.123-26.bin

Is it a question a feature set ?

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

Yes. You need a crypto image (one with k9 in the feature set name) in order to support SNMPv3 authPriv. With IP ONLY, you'll only be able to do authNoPriv.

View solution in original post

2 Replies 2

Joe Clarke
Cisco Employee
Cisco Employee

Yes. You need a crypto image (one with k9 in the feature set name) in order to support SNMPv3 authPriv. With IP ONLY, you'll only be able to do authNoPriv.

Makes sense. Thanks a lot for the fast answer !

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: