Hi
does anybody experienced problems in vlan remapping on Metro 6524 ?
This is my machine
sh ver
Cisco Internetwork Operating System Software
IOS (tm) s6523_rp Software (s6523_rp-ADVIPSERVICESK9-M), Version 12.2(18)ZU2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 30-Jan-07 03:51 by alnguyen
Image text-base: 0x40101040, data-base: 0x42D50000
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
BOOTLDR: s6523_rp Software (s6523_rp-ADVIPSERVICESK9-M), Version 12.2(18)ZU2, RELEASE SOFTWARE (fc2)
TSIswec0d uptime is 17 weeks, 6 days, 4 hours, 23 minutes
Time since TSIswec0d switched to active is 17 weeks, 6 days, 4 hours, 21 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:s6523-advipservicesk9-mz.122-18.ZU2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ME-C6524GS-8S (R7000) processor (revision 1.3) with 458752K/65536K bytes of memory.
Processor board ID CAT1209C01F
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface
32 Gigabit Ethernet/IEEE 802.3 interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
I try to explain my net config.
Basically I've a Huawei provider switch passing me the outer vlan as 726 on g1/31, my Juniper router is config on g1/25 with outer vlan 200 and inner 16 and 20.
Metro Ethernet
interface GigabitEthernet1/25
description towards router
switchport
switchport mode dot1q-tunnel
switchport vlan mapping enable
switchport vlan mapping 200 726
no ip address
no cdp enable
spanning-tree bpdufilter enable
!
!
interface GigabitEthernet1/31
description towards PROVIDER
switchport
switchport mode dot1q-tunnel
switchport vlan mapping enable
switchport vlan mapping 726 200
no ip address
no cdp enable
spanning-tree bpdufilter enable
Juniper
> show configuration interfaces ge-7/1/3
flexible-vlan-tagging;
mtu 1518;
unit 16 {
vlan-tags outer 200 inner 16;
family inet {
address 10.10.16.2/30;
}
}
unit 20 {
vlan-tags outer 200 inner 20;
family inet {
address 10.10.20.2/30;
}
}
Metro Ethernet should remap outer vlan incoming on g1/31 from 723 to 200 and on g1/25 from 200 to 723...
I'm pretty sure the Juniper firewall is config well, I'm not sure the Metro Ethernet is doing what expected.
Pls let me know if you have an idea.
Tks
Ric
