Acces to ASDM ASA 5510

Unanswered Question
Sep 25th, 2008
User Badges:

Hi, i have asa 5510 with version 7.02. I configure manually ip address of management interface and mask I diseble DHCP and permit that subnet can access via HTTP. But i try to conect and dont receive response.

any more topic for verify.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
suschoud Thu, 09/25/2008 - 12:13
User Badges:
  • Gold, 750 points or more

You should have :

http server enable

http management

and basic connectivity from PC to management interface.

Also,you can issue :

sh version command to verify if an asdm image is installed.

In the second line of the output,you would see if an asdm image is actually installed.

For making sure that there is no rogue dhcp configuration left,issue

cl config dhcpd

Try again.

Best of luck.

Do rate helpful posts.




This Discussion