Transcoders

Answered Question

Hi All,

I have a doubt in regards if I have 2 gateways and 1 CUCM clusters, is possible associate both Transcoders Gateways resources to the CUCM cluster in a group, I need to know becuase if any of the GWs failured.

Regards

Andres

Correct Answer by Brandon Buffin about 8 years 9 months ago

Andres,

Yes, you can have more than one transcoder associated with a given CUCM cluster. These can be added to Media Resourc Groups and the MRGs added to Media Resource Group Lists. The MRGLs are then assigned to device pools or devices. Resources within an MRG are load shared. Resources in diffeerent MRGs inside a single MRGL are used for redundancy.


Hope this helps. If so, please rate the post.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Thu, 09/25/2008 - 11:50
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

yes, configure them both on the same MRG to achieve that


HTH


java


if this helps, please rate

Correct Answer
Brandon Buffin Thu, 09/25/2008 - 11:50
User Badges:
  • Purple, 4500 points or more

Andres,

Yes, you can have more than one transcoder associated with a given CUCM cluster. These can be added to Media Resourc Groups and the MRGs added to Media Resource Group Lists. The MRGLs are then assigned to device pools or devices. Resources within an MRG are load shared. Resources in diffeerent MRGs inside a single MRGL are used for redundancy.


Hope this helps. If so, please rate the post.


Brandon

Actions

This Discussion