ACS 3.3.3 to 4..1.1 eval problems

Unanswered Question
Sep 25th, 2008
User Badges:

folks


i'm trying to upgrade from 3.3.3 (windows) to 4.1.1 and i get an error claiming another connection to the ACS is running, i.e. windows explorer etc but netstat shows nothing else connected


anyone has this issue before?


thanks to anyone taking the time to respond - gratefully appreciated

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Premdeep Banga Thu, 09/25/2008 - 13:24
User Badges:
  • Gold, 750 points or more

The error that we are getting is generally due to huge accumulation of logs in ACS installation folder :


Please remove all the file from following location and then try ( these files are debug files, so we donot require them) :


\CSAuth\Logs

\CSRadius\Logs

\CSTacacs\Logs

\CSLog\Logs

\CSMon\Logs

\CSAdmin\Logs

\CSDbsync\Logs


Please take a backup of following folder, if auditing is required in our organization :


\Log


After taking backup of this folder, please remove logs from following location:


\Logs\AdminAudit

\Logs\Backup and Restore

\Logs\DBReplicate

\Logs\Failed Attempts

\Logs\RADIUS Accounting

\Logs\ServiceMonitoring

\Logs\TACACS+ Accounting

\Logs\TACACS+ Administration


- Stop any anitvirus software that might be running.


- Ensure that if you are using CSMARS, and you are using pnlogagent, then that service is stopped, which can be done from services.msc.


- In the end, Also make sure that Drive on which ACS is installed or intallation folder or sub-folders are not shared.


Regards,

Prem


Please rate if it helps!

mulhollandm Fri, 09/26/2008 - 12:29
User Badges:

thanks for your help and time in replying


my problem was resolved by a reboot of the server

many thanks

Actions

This Discussion