how to copy flash

Answered Question
Sep 27th, 2008
User Badges:

Hi ,


I am trying to copy image from flash from rtr1 to rtr2.. the files is c3745-ipvoice-mz.123-11.T.bin.. and I do not know how to do that. I tried what I know but did not work.. I also wants to delete the old image on rtr2 b4 I can upload the new image to rtr2 since I do not have enoug room to have both images in one rtr.. Thanks for your help

Correct Answer by Giuseppe Larosa about 8 years 9 months ago

Hello,


you need to make rtr1 a tftp-server for the file image you want to transfer:


rtr1:

tftp-server flash:imagefile-name


rtr2:


delete flash:oldimage:filename

squeeze flash:


copy tftp flash:

it will ask the ip address

then the filename

then where you want to save it


Hope to help

Giuseppe


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Giuseppe Larosa Sat, 09/27/2008 - 08:25
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello,


you need to make rtr1 a tftp-server for the file image you want to transfer:


rtr1:

tftp-server flash:imagefile-name


rtr2:


delete flash:oldimage:filename

squeeze flash:


copy tftp flash:

it will ask the ip address

then the filename

then where you want to save it


Hope to help

Giuseppe


cisco steps Sat, 09/27/2008 - 08:48
User Badges:

Thanks Buddy !!!! done , it was easy :-). just an fyi .. I added


boot-start-marker

boot system flash c3745-ipvoice-mz.123-11.T.bin

boot-end-marker



to have a rtr2 reboot after reload


Thanks

Giuseppe Larosa Sat, 09/27/2008 - 10:02
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello,

yes it is needed well done, I focused on moving the file from rtr1 to rtr2


thanks for your kind remarks and having signaled that this case has an happy end


Best Regards

Giuseppe


Actions

This Discussion