09-28-2008 01:07 AM - edited 02-21-2020 03:01 AM
Hi!
Is it possible to clear the configuration of the Clean Access Manager (and all of its servers), if it already has lots of user-defined settings, to start configuring it from scratch?
Thx.
10-03-2008 08:49 AM
The Clean Access Manager can be restored to the factory default accounting configuration as follows:
1. Go to Administration > Backup to backup your database before restoring default settings.
2. Go to User Management > Auth Servers > Accounting > Server Config
3. Click the Reset Events to Factory Default button to remove the user configuration and replace it with the Clean Access Manager default accounting configuration.
4. Click OK in the confirmation dialog that appears.
10-03-2008 09:36 AM
lol
10-05-2008 05:14 PM
Let me give you the easiest solution (from a real-world experience). Download the Clean Access ISO from Cisco CCO and burn into a CD. Boot the CAM and CAS servers with the CD and reload the image to the appliance. This process only takes less than 10 minutes for each box. And it's clean and fresh.
10-05-2008 11:56 PM
Ok, do you have experience with the CAM Backup/Restore feature? This can be more preferrable method to rollback to the previous config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide